The LGX extruders fit very well most filament extrusion applications, but some cases demand additional features or capacity that cannot be enabled by their plastic gear sets. Those cases are: 1. When the LGX are used with a plate in between the extruder and the stepper motor thicker than our recommendation, and up to a limit. On the LGX Optimal Thickness : between 0.3 and 2.3 mm; Limited to 3.0 mm On the LGX Lite and LGX Lite Mirrored Optimal Thickness : 2.5 mm; Limited to 3.0 mm Note : the LGX Lite V2 cannot be mounted with a plate between the extruder and the motor. 2. When the LGX is used in work environments warmer than our recommendation, and up to a limit. On the LGX We recommended Max Environment operating temperature : 70°C Limited to 90°C On the LGX Lite, LGX Lite Mirrored and LGX Lite PRO We recommended Max Environment operating temperature : 70°C Limited to 90°C 3. When the current fed to the LGX stepper motor is higher than our recommendation, and up to the 95% of the rated current. On the LGX Peak current : 0.7A Max recommended current: 0.63A. We recommended between ~0.45 and ~0.60A On the LGX Lite and LGX Lite Mirrored Peak current : 1.0 A Max recommended current : 0.7A. We recommended between ~0.45 and ~0.60A
