With the Bilstein 5100 lift kit from YotaMafia, you get everything you need to lift your 2nd Gen Tacoma.The front Bilstein 5100’s allow for easy comfort when off-roading or driving on pavement, and are paired with an OME coil. Depending on your setup will depend on what you should run. The medium and heavy-duty options will give the highest lift, but if not running extra weight will make your ride stiffer.The rear Bilstein 5100’s allow for the same smoothness as the front no matter where you drive and achieve lift via the ICON Add A Leaf. If you are running more weight in the rear, or plan to, it is recommended to run the Dakar leaf pack.Because lifting vehicles affects factory alignment, we recommend purchasing the aftermarket SPC upper control arm. This not only will allow for proper alignment but also will be able to handle extra droop compared to OEM. The SPC UCA is also maintenance-free.If you have any questions on the setup you should run for your 2nd Generation Tacoma, or recommendations on what weight coil or leaf pack you should go with, call us at any time and talk to our dedicated team about your build. We get asked a lot about the tire size you can run on this setup. For the tire size, we recommend running a 275/70R17 with this kit at the highest setting. With that, you are likely not going to rub on your cab mounts or the fender plastics. But if you would like to run a set of 33″ Tires, you should check out this guide on TrailTacoma.com; Fitting 33″ Tires on 2nd Gen Tacoma.Installation Guide2nd Gen Tacoma Installation Guide: 2nd Gen Tacoma Bilstein 5100 Install GuideFinal Shots Factory Coilovers Vs. 5100 Series CoiloversBefore and After
